HISTORY OF STEEL – The Journey to Modern Steel

Little did the world know that the introduction of a new steelmaking technology was poised to revolutionize steel industry. The steel mills in other countries were lagging behind the United States, who still remained the king of steel.

One German scientist and glassmaker by the name of William Siemens sought to change the process of steelmaking for the better. In 1847, he realized that the furnace could hold its peak temperature for a longer period of time if the emitted heat was recycled back into it. Siemens built a glass furnace with firebrick tubes. The exiting gases flowed through the tubes, mixed with the outside air, and were recycled back in the furnace. 20 years later, Pierre-Emile Martin, a French engineer, built a Siemens furnace to smelt iron. The liquefied metal remained in the same state for a longer time than it did in the Bessemer Converter, which gave sufficient time to add the required amounts of carbon-filled iron alloys, to turn the metal into steel. Due to the excess heat, the newly-made steel could be melted down too. The Siemens-Martin process, also known as the open-hearth process, became known all across the world.

In the 20th century, Robert Durrer, a Swiss engineer, improved upon the Siemens-Martin process. After the WWII, he moved from Germany to Switzerland and performed experiments with the Bessemer process. He used pure oxygen instead of air in the furnace and found that the former removed carbon from molten iron much more effectively. Furthermore, he found that blowing oxygen from above instead of below the furnace helped in melting scrap steel into pig iron and recycling it back into the steelmaking process. By doing so, even the phosphorus could be effectively removed from the iron. Durrer’s method, also known as the basic oxygen process, used the best of both the Bessemer and Siemens-Martin processes, resulting in an even cheaper way to produce large quantities of steel.

Seeing the success of Durrer’s method, European and Asian nations adopted this into their mills, while the United States remained happy with the Siemens-Martin process. The American confidence in the Siemens-Martin process exposed them to foreign competition, without their knowledge.

Leave A Comment